|
News & Info
|
 |
 |
Seller Signup...
Quality Service, Seller or Tradesperson? Sign Up Now!
|
|
Home & Garden Articles
A Guide to Buying a Spiral Staircase
Mon 01 Dec 2008 - 15:14
A Guide to Buying a Spiral Staircase
By [http://ezinearticles.com/?expert=Derek_Rogers]Derek Rogers
With many people renovating their existing properties rather than opting to move, a staircase which takes up less space for accessing new levels or rooms has never been a more popular feature. A spiral staircase can take up nearly half the room of a conventional straight flight staircase, whilst still providing a convenient means of ascent.
When looking to purchase a spiral, the first decision to make is whether a small kit staircase will be sufficient, or whether a larger more bespoke feature stair would be the better option. The kit staircases tend to be designed as secondary access staircases, for going up to a mezzanine level or a converted loft space. The largest kit spiral is likely to be around 1600mm total diameter. By contrast, bespoke spirals can be anything up to 3000mm overall diameter, and can be safely installed as the main staircase in a property. They also tend to have a wider range of materials available, such as different timbers or the option for stainless steel metalwork.
From a technical point of view, the most common error people make whilst searching for their first spiral staircase is in regards to the opening. The opening in the ceiling for a spiral should ideally exceed the total diameter of the stair being placed in it by 100mm. So, if a 1600mm diameter spiral is being installed, a circular opening of 1700mm or more would be necessary, allowing 50mm on either side of the staircase. This is to allow the 50mm "knuckle gap" as a person climbing the stair moves their hand along the handrail.
Spiral stairs are available to suit many budgets; kit ones can begin at £800 or so, whilst top of the line bespoke spirals, in oak or with stainless steel centre columns, can reach upwards of £9000. In general, if looking for a small secondary access stair, budgeting £1800-£1900 should be sufficient unless it is passing over 3000mm in height, and for a main staircase, a budget of around £5000-£6000 should cover the more popular options in terms of material and style.
To purchase a spiral, the important dimensions to know are:
The floor to floor height
The diameter of the staircase
The dimensions of the opening in the ceiling (if applicable)
Important building regulations to be aware of when selecting a spiral staircase include the 100mm gap rule, which states that clear distances on the staircase (such as between the spindles of the balustrade) may not be more than 100mm wide. This also applies to the risers - or gaps underneath each tread - which are normally supplied with a riser bar to fit across the gap, thereby enclosing it sufficiently.
The other critical regulation is in regards to clear tread width, which was touched on above. Contrary to popular belief, a 1600mm diameter spiral does not have the required 800mm clear tread width, as the diameter of this spiral includes both the centre column width (normally 120-150mm) and the handrail to either side of the stair (40-50mm). Therefore for a stair with an 800mm clear tread width, a minimum overall diameter of 1850-1900mm would be recommended.
Derek Rogers is a freelance writer who writes for a number of UK businesses. For information and advice on [http://www.completestairsystems.co.uk/spiral_stairs.html]Spiral Staircases, he recommends Complete Stair Systems.
Article Source: http://EzineArticles.com/?expert=Derek_Rogers http://EzineArticles.com/?A-Guide-to-Buying-a-Spiral-Staircase&id=1732502
Looking for information on General Home Improvement, Find a supplier at HomeWise.ie
back to General Home Improvement articles
back to all home & garden articles
|
|