HomeWise.ie
Ireland's Home & Garden Search Engine
   


Seller Signup...

Quality Service, Seller or Tradesperson? Sign Up Now!




Home & Garden Articles


Evaporative Cooler Parts Examined

Wed 09 May 2007 - 06:59

Evaporative Cooler Parts Examined
By Andrew Caxton

The ability and performance from an evaporative cooler can vary depending on the parts contained in it. The function of the main evaporative cooler parts used in an evaporative cooler are explained in this article, advising the role of each individual component and how they work together to function as a cohesive unit.

The circulating pump, the thermometer, the absorbent wet pad and the cooling fan are the main components of the cooler unit and work as follows: First, hot air is drawn into the unit from outside and then, drawn through a wet pad which results in cooling the air. Then the cooled air is blown through the vents, indoors.

What is the biggest factor in the cooling result?

The wet pad is an important component and comes in several varieties. Absorbency is a very important factor in the type of pad used and the rate of absorbency averages between sixty and ninety percent (depending on what type of pad is utilized).

Aspen wood pads inside plastic netting are popular and very effective pads for these coolers. Fiber pads are also used. Pads are made in varying degrees of thickness and the general consensus is that the thicker the pad is, the better it works. Stacked tough corrugated material or fiber pads are also options that are utilized. These are a more expensive option up front but have a significant return on the investment due to less maintenance requirements and wind velocity.

Why is there a need for a circulating pump in the cooler?

Similar to functioning like a car radiator, a circulating pump keeps the water moving within the pad, keeping it wet and making the cooler function to continuously create the cooling action. Like a radiator, without the circulation, hot air would eventually result. The fan is a critical part of the evaporative cooler as well in that it's the component that brings the hot air into the cooler and pushes it through the wet pad, resulting in cooling prior to forcing it through the vents. The quantity of inlets in the evaporative cooler drawing the air from depends on what kind of wet pads are installed. The higher number of inlets, the lower the resulting amount of air velocity.

There are several factors that determine how effective the evaporative cooler is. The temperature is determined on the outside temperature, the pad used and the overall working condition of the unit. The pump and the pad can have the biggest impact on the unit's performance.

Andrew Caxton is a consultant who writes on many consumer topics like air coolers for http://www.evaporative-air-coolers.com . Find more publications about evaporative cooler parts at his website.

Article Source: http://EzineArticles.com/?expert=Andrew_Caxton
http://EzineArticles.com/?Evaporative-Cooler-Parts-Examined&id=556238


Looking for information on General Home Improvement, Find a supplier at HomeWise.ie

back to General Home Improvement articles
back to all home & garden articles