HomeWise.ie
Ireland's Home & Garden Search Engine
   


Seller Signup...

Quality Service, Seller or Tradesperson? Sign Up Now!




Home & Garden Articles


How To Select The Ideal Lighting Fixtures For Your Home Woodworking Shop

Fri 02 Feb 2007 - 10:32

How To Select The Ideal Lighting Fixtures For Your Home Woodworking Shop
By Robert Schielmann

Shop lighting is such an important aspect of the woodshop, but rarely given the amount of thought that it needs. Typically the shop owner will go out and buy a couple of strip fluorescent light fixtures and hang them up. That might be all that is needed to light up the workshop. But as you set up the tools in your woodworking shop you might find that you are casting a shadow over the tool or worse there is a dark spot where a fixed tool is sitting. Now you have to reposition the lights or purchase more light fixtures.
The most common home woodworking shop light fixture is the tube fluorescent lighting. They are energy efficient, low cost and easy to install.

Before making a plan for the lighting fixtures in the workshop, plan and layout where all of the woodworking tools will be arranged in the workshop. This will make planning the lighting needs much easier and will help prevent dark zones and casting shadows over the work surface of the tool.

The type of tool and the tool's working area will help determine how much light is needed. Table saws need to have at least their table top well illuminated. The out feed table needs some light but not as much. For a table saw a four foot fluorescent tube light over the table saw table will provide plenty of light.
A drill press needs much less light, but it needs to be more focused onto the drill press table.

Garage workshop

A woodworking shop in the garage has its own specific needs. The space is multiuse space that is used as a workshop and a place to park the family vehicles. The woodworker's tools must be portable so that they can be rolled out of the way to make room for the vehicles. For a typical two car garage that measures approximately twenty two feet by twenty four feet, two to four two tube fluorescent fixtures will provide ample lighting of the work space.

Celler workshop

Having a woodworking shop in the basement is nice and allows for a more permanent setup of the shop tools. A basement shop does present some interesting challenges. Most basements have a low ceiling height. The typical basement ceiling height is 7 feet. This makes lighting a challenge since suspending lights from the joists leads to potential head banging and being struck when moving material around the woodshop.

Basement ventilation is typically poor at best where heat from the lighting fixtures can make it uncomfortable to work in.

Hang fluorescent light fixtures in between the joists. Attach a light weight chain to the sides of the adjacent joists and suspend the fluorescent light from the chain. Hang the fluorescent light fixture so that it is flush with the bottom of the joists. This will help keep it out of the way and still provide ample light. It might be necessary to use an additional light or two because of the shading caused by recessing the light.

Freestanding shed

The typical barn style shed design creates a large open space. Fluorescent light fixtures are the simplest and cost efficient choice in illuminating the work space.

A typical twelve by fourteen foot workshop two four foot fluorescent light fixtures are more than enough. Additional task lighting may be needed if there is overhead storage over the work bench.

Task lighting

Task lighting gives you the light you need right where you need it. A work light with a built in ten or thirteen watt light bulb is a popular choice. These lights require a hook, nail or something else to hang on. However you are limited to the brightness of the light based on the model. Clamp on reflectors are very effective task light. Use compact fluorescent light bulb in the clamp on reflector. You can use bulbs ranging from thirteen watts to 24 watts. This yields an illumination from 60 watts to 150 watts, with very little heat from the bulb.

Determining the right amount and type of lights the woodworking shop is a very important choice that if done incorrectly will result in frustration and possibly injury from a power tool. If done incorrectly it will require you to redo the lighting to correct any deficiencies.

The wood working hobbyist contains additional articles on the different types of shop">http://www.wood-working-hobby.com/2006/12/08/what-type-of-shop-lighting-should-i-use/">shop lights and which is best for your woodworking shop.

Article Source: http://EzineArticles.com/?expert=Robert_Schielmann
http://EzineArticles.com/?How-To-Select-The-Ideal-Lighting-Fixtures-For-Your-Home-Woodworking-Shop&id=437209


Looking for information on Carpentry, Find a supplier at HomeWise.ie

back to Carpentry articles
back to all home & garden articles